dRj0nbagworks.

11 03 2019

Well, I’ve been sewing again. a few days off and bad weather and this is what happens. Idle hands and all that,

First up was an ultra light bar harness, with 4 point mounting for either Jones Loop bar, or a Bar Yak Ultra. The benefit here is reduced weight and amazing stability for your Shredpacking adventures. This has a small carbon fibre tube integrated to give it rigidity on a lateral plane, whilst retaining light weight construction throughout. VX33 on top, in Camo and Gridstop dyneema for the underside.

To go with that I made a DCF Hybrid double ended roll top bag. this is light, waterproof and the perfect size for my shoulder season kit. I might make one with the lighter hybrid fabric as this at 170gsqm feels über robust.

I taped the seam, so this is waterproof – which makes packing it super easy. it is around 16cm diameter and 46cm long.

Lastly I made a bag for the Strap Deck. This is the latest ‘bagworks product and it is being a wee bit sluggish to catch on. I reckon because I have been ordering in low numbers, they are relatively expensive for what they seem to be. However, add a bag such as my custom version, or a Revelate Polecat, or even just a dry bag if you use Voile Straps and you can secure a heck of a lot of stuff even with the medium sized Strap Deck. I’m confident in time they will become a ‘go to’ item for ultralight bike packing. The bonus is that they are subtle when no bags are mounted, and they do not require straps around the frame to stabilise things unless significant weight is carried.

I am a huge proponent of splitting kit up and placing it around the bike in such a way that there isn’t too much mass on the front, or under the saddle specifically – keeping handling more ‘normal’. This helps if you bikepack Singletrack.

The bag is made from VX33 Camo, the same as the Harness and then it has a Liteskin LS 42 roll top closure on the portion that will see less abrasion. Its light and 11cm diameter 26cm long with 4 rolls and fits a medium Strap Deck beautifully.

It’s fun pushing things on a wee bit. Next is to actually get a weather and time window to go use the stuff!


Actions

Information

One response

12 11 2019
On bar angle, width and hand position. | drj0nswanderings

[…] From the first time I put them on a bike, swapping out my custom bent Seven 11° ti flat bars, I knew that they were awesome. I have no doubt I will always have Jones bars in use, particularly in the carbon version – light, forgiving and strong. They also have more grip positions for those long rides and the forward loop is excellent for additional bar mounted objects or handlebar harnesses. […]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s




%d bloggers like this: